The Roll Cage

We weren't quite sure how we going to do the roll cage so we went out and bought pipe insulation the foam type to get an idea as to what we wanted. we laid the whole thing out and then went on line to find a place that would bend the cage. Tom found a place they sent us the information they needed to do the bending and the next thing we knew the bent tubing arrived and we were on our way to building the roll cage. We had to cut holes in the roof to get acess to weld around the top of the cage by the roof. The back holes we turned into air vents. The front holes we welded up .This is when I found out Tom cannot weld! The part of the roof he welded looked like a soup bowl .We got a lot of laughs out of this. One thing about working on this project we made fun out of the mistakes we made and we never had an argument. The nice thing about working on the roll cage is it got me off the cold floor. I complained to Tom one day that the beer was warm from his fridge so the next time I came over he had all the beer on the floor and it was cold.